Nestogen - AIO | All In One Scouring & Levelling Agent For One Bath Dyeing

• Product Information

  Nestogen – AIO is highly efficient scouring & wetting agent for the pre-treatment of polyester & its blend processing suitable for one bath scouring & dyeing. It exhibits a range of desirable properties which gives it multiple uses in synthetic textile pre-treatment processing.

• Key Features & Benefits

  1. Powerful Scouring & Stain removing agent
  2. Applied successfully for All In One scouring and dyeing at one stage process
  3. Powerful wetting agent
  4. Very good swelling agent
  5. Stable and very effective in alkaline bath too
  6. Imparts excellent whiteness to the fabrics
  7. High oil, wax and fat emulsifying property 

• General Characteristics

  Appearance                     :         Light Yellowish Liquid      

  Nature                              :         Non ionic

  Composition                    :         Synergistic blend of surfactants and organic  solvents

  Solubility                           :         Extremely good in normal water

  Stability to hard water       :         Good

• Application

  1. Scouring Of Synthetic Fabrics

  Nestogen – AIO               =        0.5 – 1.0 % O.W.F.

  Caustic Flakes                  =        2.0 – 5.0 gms / lit.

  ( Quantity depends upon quality of fabrics )

  Soda Ash                          =        Optional   ***

   

  2. One Bath Scouring And Bleaching

  Nestogen – AIO               =        0.5 – 1.0 % O.W.F.

  Caustic Flakes                  =        2.0 – 4.0 gms / lit.

  ( Quantity depends upon quality of fabrics )

  Soda Ash                          =        0.5 – 1.0 gms / lit.

  H₂O₂ (50%)                       =        2.0 – 5.0 gms / lit.

   

  3. One Bath Scouring And Dyeing

  ***     It is recommended to give OXALIC wash along with 100 – 200 gms of N.I.D. (9.5 mole) before treating goods.

  Nestogen – AIO               =        0.5 – 1.5 % O.W.F.

  Acetic Aicd ( G )                =        0.7 – 1.0 gms / lit.

  (Quantity depends upon bath condition – pH/4)

  Nestogen – LDRL              =        0.5 – 1.0 gms / lit.

  Nestol LS Powder              =        0.5 – 1.0 % gms / lit.

   

  • Dose the chemicals at room temperature and run 2 cycles
  • Pass the pre dispersed dye at 50-55 Deg C. and run the below program

   

  Temperature	Rate of Rise	Hold Time
  50 Deg C	1 Deg C / min	-
  60 Deg C	1 Deg C / min	10 min
  90 Deg C	1 Deg C / min	10 min
  110 Deg C	0.5 Deg C / min	10 min
  130 Deg C	0.5 Deg C / min	45 min